www.retailerwarehouse.com

This unit is a dial only version of the VX 570.  In addition to dial connectivity, the VX 570 (see the VX 570 DC) also offers an option that provides both Ethernet and dial communications. Dial connectivity can be used today, then switched to Ethernet at any time without added cost or inconvenience. Or merchants with broadband service already installed can immediately process payments through this always-on connection.

The VX 570's familiar design, including the intuitive ATM-style interface and bold menu prompts, reduces help desk training time, support and costs. And, the new anti-glare white backlit display improves readability.

With its increased memory, you can offer merchants a wide range of profitable, value-added applications, strengthening relationships and generating new sources of income for you.

The USB Flash load enables optimized, protected downloads via restricted USB technology. And, the VX 570 offers the most reliable security available, including SSL and VeriShield file authentication to help prevent fraud and other software intrusions.

This Verifone credit card machine is new and comes with a 1-year warranty.  Read more about the warranty on the "extended information" tab.

• Processor:
• 200 MHz ARM9 32-bit RISC microprocessor
• Memory:
• 6 MB (4 MB of Flash, 2 MB of SRAM) Optional 12 MB (8 MB of Flash, 4 MB of SRAM)
• Display:
• 128 x 64 pixel graphical LCD with backlighting; Supports 8 lines x 21 characters
• Magnetic Card Reader:
• Triple-track (tracks 1, 2, 3), high coercivity, bi-directional
• Smart Card:
• ISO 7816, 1.8V, 3V, 5V or synchronous and asynchronous cards; EMV Level 1 and 2 Type Approved
• SAM Card Reader (Optional):
• 1 or 3 Security Access Modules
• Keypad:
• 3 x 4 numeric keypad, plus 8 soft-function keys and 4 screen addressable keys; PCI approved
• I/O Modules:
• 14.4k modem module; Ethernet and 14.4k modem combination module
• Peripheral Ports:
• One USB 1.1 port supports flash memory devices; Two RS-232 ports support peripherals including PIN pads and check readers; One telco port and one Ethernet (with Ethernet/14.4 I/O module) support Communications
• Printer:
• Integrated thermal printer with graphics capabilities, 18 lines per second, 24 or 32 columns, standard paper roll 58 mm (2.25 in.) x 25M, single ply; Optional large paper roll 58 mm x 35M
• Modem:
• Standard 14.4k bps modem supporting Bell 103/212a, CCITT V.21/V.22/V.22bis/V.32/V.32bis (300/1200/2400/9600/14400 bps) and HC Fast Connect for 1200 bps. Optional: Fast POS for 9600 bps
• Protocols:
• Application selects between asynchronous protocols (Visa 1, Visa 2, and others) and synchronous protocols (including ISO 8583/SDLC)
• Security:
• SSL v3.0, 3DES encryption, Master/Session and DUKPT key management; VeriShield file authentication
• Physical:
• Length: 209 mm (8 in.); Width: 102 mm (4 in.); Height: 78 mm (3.07 in.) Weight: Terminal/750 g (1.65 lbs.), Full shipping/1,377 g (3.03 lbs.)
• Environmental:
• 0 to 40 C (32 to 104 F) operating temperature, 5% to 90% relative humidity, non-condensing
• Voltage:
• Standard: AC input 100 - 240 VAC, 50/60 Hz; DC Output 8.6 - 9.4 VDC, 4.0 Amp

New or REFURBISHED EQUIPMENT

DCCM will warranty all refurbished equipment purchased from us for up to one (1) year from the date of purchase. If equipment is defective within thirty (30) days from the date of purchase it will be diagnose and shipped within 48 hours at DCCM's expense. If equipment becomes defective after the first thirty (30) days it will be repaired within 7 to 10 business days and shipped back at DCCM's expense. However, if the equipment is found not to be defective, DCCM will ship the item back at the customer's expense along with a $20.00 diagnostic fee. All items are shipped via Ground service unless customer request otherwise and is willing to incur the additional shipping costs. DCCM will NOT accept packages without an assigned RMA #!

WHAT IS NOT COVERED UNDER WARRANTY

Warranties do not cover the product if it was misused, neglected, improperly installed, physically damaged or altered, either internally or externally, or damaged from improper, use in an unsuitable environment, or Acts of God.

RETURN POLICY

• DCCM offers a thirty (30) day return policy on all merchandise. After (30) days, we will NOT accept any returns or exchanges. A 20% restocking fee will be charged for all equipment that is returned and not defective. WE WILL NOT ACCEPT PACKAGES WITHOUT AN ASSIGNED RMA NUMBER!
• RESTRICTIONS:
• Paper, ribbon, and credit card slips are non-returnable. All software that has been opened or used is not eligible for return. (With the exception of Go Software products. These items cannot be returned after 30 days of purchase. Custom-made items are non-returnable.
• A Nurit 3010 CDPD may only be returned for replacement if the product is determined to be defective. It will be replaced with an identical Nurit 3010 CDPD unit.

HOW TO RETURN A PRODUCT

Please visit the website and fill out a Return Merchandise Request (RMR). This will be submitted to one of DCCM's Customer Care Representatives for review. You will than be contacted within 24 hours with a Return Merchandise Authorization (RMA) number and instructions for shipping the product back. If you have not heard from a Customer Care Representative within 24 hours please contact us at 800*785*5939. Our business hours are Monday thru Friday 9:00 am to 6:00 pm (EST).

PREPARING THE PRODUCT FOR SHIPPING

• An RMA # must be issued before the product can be returned. All original merchandise must be sent back (power cords, books, etc.) or you will be invoiced for missing items. Package the unit carefully and pad for safety. Fully insure all shipped products. Returned products must be shipped prepaid. If products arrive in damaged condition due to obvious mishandling, you are responsible for filing the claim with your carrier. Defective equipment that arrives without an RMA # will either be refused or returned at the sender's expense. We are not liable for loss or damage to unauthorized product returns.
• Please write in black bold print the RMA # on the outside of the box and on all paperwork.

 REQUIRED INFORMATION WHEN REQUESTING AN RMA

• The serial number of your defective product. Information about the installation and use of the unit. Information about the failure and/or reason for the return.
• A copy of your dated proof of purchase or the Order Number.